Model NO.: XA Working Pressure: High Pressure Pump
Position of Pump Shaft: Horizontal Pump Mounting Height: Since Irrigation Centrifugal Pumps Usage: Pump Certification: CE Specification: CE HS Code: 841370999 Impeller Number: Single-Stage Pump Influent Type of Impeller: Single Suction Pump Pump Casing Combined: Horizontal Split Pumps Impeller: Semi-Open Name: Horizontal Centrifugal Pump
Inline Pump Trademark: EAST Origin: Shanghai, China XA horizontal centrifugal pump/ inline pump
|XA horizontal centrifugal pump/ inline pump|
|Model ||XA |
|DN(flange) ||80~800mm |
|Capacity ||3~3000m³/h, with 2950RPM, 1450RPM, 980RPM |
|Head ||5~130m |
|Permitting working pressure ||1.5Mpa |
|Medium Temperature ||-20°C~105°C |
|Material ||Cast iron-HT200, HT250; SS304, SS316, SS316L, Duplex SS |
|Partical || 80mg/l |
|Motor ||380V, 415V, 660V; IP54, IP55; 50Hz, 60Hz |
|Shaft ||Cast steel, 2Cr13 |
|Casing and cover ||Cast iron, Nudular cast iron, Cast steel |
|Impeller ||Cast iron, Bronze, stainless steel |
|Mouth seal ||Cast iron, nudular cast iron, bronze, stianless steel. |
|Shaft seal ||Mechanical seal or packing seal |
|Bearing ||Closed grease lubricated roller bearing(SKF, NTN) NSK thrust |
and roll bearing
|Flange standard ||ASME, DIN, GB |
|Seal by ||Burgmann mechanical seal or gland packing |
|Quality control system ||ISO9001:2000, ISO14001, OHSAS18001, ISO2548, GB/T3216, |
|Main Application ||Power plants, water supply, municipal, construction, fire fighting, |
industrial and mining enterprises and other industries for the
transportation of water, of similar physical and chemical properties
of water and other media
Over 20 years' export experience.
Shanghai East Pump (Group) Co., Ltd is a well-known pump manufacture in China, including scientific
research, manufacture, marketing and service.It owns 16 sub-companies, 8 large manufacturing bases all over china.The sales revenue in 2014 reaches 400 Million dollars.Our products range
covers Centrifugal Pump,Stainless steel Multi-stage Pump, Submersible Pump,
Fire-fighting pump,Magnetic Pump,Diaphragm Pump,Slurry Pump,etc.
BROTHER digit-control machine tools, borer, broacher, vertical lathe and large special test center run through the production flow line. Without excellent production equipment, there would not be excellent products.
The spirit of hard work is particularly presented in the production process here in Eastpump, even if a small screw, everything and every detail is made meticulously and shows the professional quality.
Eastpump strictly follows ISO 9001 quality control system, ISO 4001, OHSAS 18000etc. management systems and the scientific and reasonable flow of operation, making sure of a high effective high quality production process.
The group company now holds a large pump test center, a three-coordinate measurer, a dynamic-static measurer, a quick laser shaping instrument, a multi-functional shot-blasting machine, an automatic argon-arc welder, a large lathe, a large mill, numeral control machine tools etc. more than 2000 sets of various nationwide and worldwide advanced production and detection facilities and over 4500 staff members, of which 72.6% are graduated from colleges and technical schools, 375 hold a junior title, 28 senior, 2 national experts and 5 professors. Every year this group puts a number of capital for technical innovation, product development and equipment import and, up till now, holds up to 600 national patent technologies and takes part in the draft-out and edition of both national and industrial standards, in total of tens of the product and technical standards covering water conservancy, chemical industry, fire-fighting, city water supply etc. Fields.
Must provide order information:
The required pump model or user operating point flow, head, NPSH, the nature of the medium and temperature parameters and special parameters of the basic requirement;
The pump main parts material (not to specify the configuration according to the sample delivery);
Inlet pressure (if inlet pressure >=0.6MPa, pump casing should equip with high strength material);
The shaft seal type (three are mechanical seal, injectable soft-fillings seal, special seal part, packing seal and so on, it will delivery packing seal if it does not indicate);
The bearing structure type (select according to medium temperature and so on, it will deliver standard fitting if it does not indicate);
Revolving direction of pump (view from the end of transmission, the revolving direction of pump is anticlockwise. It will deliver standard fitting if it does not indicate);
Motor rotational speed, power, voltage, protection rank, insulation grade, cooling method, whether to guard against explosions and so on;
Base: the sample 315 with the following common base frame sizes, frame sizes above 315 with a split base or no base, please specify when ordering;
For spare parts, please indicate the name and quantity of spare parts required;
Ordering, no special requirements to flanges book list data delivery, if any special requests when ordering;
State seal flushing method: wash the external and external washing. Add the rinse water temperature is suitable for =80°C or media containing sand and other particles of the occasion;
Flat flange of the pump, with the sealing surface for sealing wire required the contract specified.
The order of user isn't limited by the data which listed in the sample performance curve and performance parameter chart, this company may design and provide the products specially according to user's actual requirement flow and head;
If it is close to the listed performance parameter, it will prefer to select the standard impeller pump and the high speed pump generally (the premise is that satisfies the requirement of cavitation performance);
If user's required flow and head parameter aren't in the scope of product's large flow and low head operating condition, the matched motor power may confirm and reduce properly according to the actual operating condition point.
if you have special selecting or have the unclear place to the sample, please inquire the technical support department of Shanghai East Pump (Group) Co., Ltd directly.
Recommended spare parts: shaft, mechanical seal, seal ring, packing, bearings, impeller.
East Pump persist in "consumers' satisfaction" as our objective. "To offer consumers with high-class services" as our promises. They are embodied in our all processes of sales.
Before-sales service: Our engineers offer consumers design and consultation services. They will commend the optimum products, therefore, losses because of unsuitable select of pump can be averted.
Sales service: We follow the products sold on our own initiative. Consumers can receive our professional training free to ensure our products can operate with high efficiency to avoid equipment hitch owing to consumers' incorrect use.
After-sales service: Our service people will forwardly make selective-check for product sold termly. Furthermore, they will supervise consumers maintaining the equipment in time. Once our products work wrong, we will obviate the trouble as soon as possible, to make equipment operate normally.
Item of service
Technical training Equipment evaluation
Installation and debugging Troubleshoot
Maintenance Update and improvement
Commitment to the service
1. After signing the contract , send engineer for assisting installation and debugging.
2. One-year warranty. Provide technical support free all-life of the products.
3. Keep all-life contacting with clients, get feedback on use of the equipment and make the products quality continually perfected.
4. Hot-line of service is available in 24h, responded in 8h. 400 1666 099
Contact us if you need more details on Centrifugal Pump. We are ready to answer your questions on packaging, logistics, certification or any other aspects about Pump、High Pressure Pump. If these products fail to match your need, please contact us and we would like to provide relevant information.
Product Categories : Single Stage Pump